Skip to content

baidu-research/warp-ctc

Repository files navigation

Baidu Logo

In Chinese 中文版

warp-ctc

A fast parallel implementation of CTC, on both CPU and GPU.

Introduction

Connectionist Temporal Classification is a loss function useful for performing supervised learning on sequence data, without needing an alignment between input data and labels. For example, CTC can be used to train end-to-end systems for speech recognition, which is how we have been using it at Baidu's Silicon Valley AI Lab.

DSCTC

The illustration above shows CTC computing the probability of an output sequence "THE CAT ", as a sum over all possible alignments of input sequences that could map to "THE CAT ", taking into account that labels may be duplicated because they may stretch over several time steps of the input data (represented by the spectrogram at the bottom of the image). Computing the sum of all such probabilities explicitly would be prohibitively costly due to the combinatorics involved, but CTC uses dynamic programming to dramatically reduce the complexity of the computation. Because CTC is a differentiable function, it can be used during standard SGD training of deep neural networks.

In our lab, we focus on scaling up recurrent neural networks, and CTC loss is an important component. To make our system efficient, we parallelized the CTC algorithm, as described in this paper. This project contains our high performance CPU and CUDA versions of the CTC loss, along with bindings for Torch. The library provides a simple C interface, so that it is easy to integrate into deep learning frameworks.

This implementation has improved training scalability beyond the performance improvement from a faster parallel CTC implementation. For GPU-focused training pipelines, the ability to keep all data local to GPU memory allows us to spend interconnect bandwidth on increased data parallelism.

Performance

Our CTC implementation is efficient compared with many of the other publicly available implementations. It is also written to be as numerically stable as possible. The algorithm is numerically sensitive and we have observed catastrophic underflow even in double precision with the standard calculation - the result of division of two numbers on the order of 1e-324 which should have been approximately one, instead become infinity when the denominator underflowed to 0. Instead, by performing the calculation in log space, it is numerically stable even in single precision floating point at the cost of significantly more expensive operations. Instead of one machine instruction, addition requires the evaluation of multiple transcendental functions. Because of this, the speed of CTC implementations can only be fairly compared if they are both performing the calculation the same way.

We compare our performance with Eesen, a CTC implementation built on Theano, and a Cython CPU only implementation Stanford-CTC. We benchmark the Theano implementation operating on 32-bit floating-point numbers and doing the calculation in log-space, in order to match the other implementations we compare against. Stanford-CTC was modified to perform the calculation in log-space as it did not support it natively. It also does not support minibatches larger than 1, so would require an awkward memory layout to use in a real training pipeline, we assume linear increase in cost with minibatch size.

We show results on two problem sizes relevant to our English and Mandarin end-to-end models, respectively, where T represents the number of timesteps in the input to CTC, L represents the length of the labels for each example, and A represents the alphabet size.

On the GPU, our performance at a minibatch of 64 examples ranges from 7x faster to 155x faster than Eesen, and 46x to 68x faster than the Theano implementation.

GPU Performance

Benchmarked on a single NVIDIA Titan X GPU.

T=150, L=40, A=28 warp-ctc Eesen Theano
N=1 3.1 ms .5 ms 67 ms
N=16 3.2 ms 6 ms 94 ms
N=32 3.2 ms 12 ms 119 ms
N=64 3.3 ms 24 ms 153 ms
N=128 3.5 ms 49 ms 231 ms
T=150, L=20, A=5000 warp-ctc Eesen Theano
N=1 7 ms 40 ms 120 ms
N=16 9 ms 619 ms 385 ms
N=32 11 ms 1238 ms 665 ms
N=64 16 ms 2475 ms 1100 ms
N=128 23 ms 4950 ms 2100 ms

CPU Performance

Benchmarked on a dual-socket machine with two Intel E5-2660 v3 processors - warp-ctc used 40 threads to maximally take advantage of the CPU resources. Eesen doesn't provide a CPU implementation. We noticed that the Theano implementation was not parallelizing computation across multiple threads. Stanford-CTC provides no mechanism for parallelization across threads.

T=150, L=40, A=28 warp-ctc Stanford-CTC Theano
N=1 2.6 ms 13 ms 15 ms
N=16 3.4 ms 208 ms 180 ms
N=32 3.9 ms 416 ms 375 ms
N=64 6.6 ms 832 ms 700 ms
N=128 12.2 ms 1684 ms 1340 ms
T=150, L=20, A=5000 warp-ctc Stanford-CTC Theano
N=1 21 ms 31 ms 850 ms
N=16 37 ms 496 ms 10800 ms
N=32 54 ms 992 ms 22000 ms
N=64 101 ms 1984 ms 42000 ms
N=128 184 ms 3968 ms 86000 ms

Interface

The interface is in include/ctc.h. It supports CPU or GPU execution, and you can specify OpenMP parallelism if running on the CPU, or the CUDA stream if running on the GPU. We took care to ensure that the library does not perform memory allocation internally, in order to avoid synchronizations and overheads caused by memory allocation.

Compilation

warp-ctc has been tested on Ubuntu 14.04 and OSX 10.10. Windows is not supported at this time.

First get the code:

git clone https://github.com/baidu-research/warp-ctc.git
cd warp-ctc

create a build directory:

mkdir build
cd build

if you have a non standard CUDA install export CUDA_BIN_PATH=/path_to_cuda so that CMake detects CUDA and to ensure Torch is detected, make sure th is in $PATH

run cmake and build:

cmake ../
make

The C library and torch shared libraries should now be built along with test executables. If CUDA was detected, then test_gpu will be built; test_cpu will always be built.

Tests

To run the tests, make sure the CUDA libraries are in LD_LIBRARY_PATH (DYLD_LIBRARY_PATH for OSX).

The Torch tests must be run from the torch_binding/tests/ directory.

Torch Installation

luarocks make torch_binding/rocks/warp-ctc-scm-1.rockspec

You can also install without cloning the repository using

luarocks install http://raw.githubusercontent.com/baidu-research/warp-ctc/master/torch_binding/rocks/warp-ctc-scm-1.rockspec

There is a Torch CTC tutorial.

Contributing

We welcome improvements from the community, please feel free to submit pull requests.

Known Issues / Limitations

The CUDA implementation requires a device of at least compute capability 3.0.

The CUDA implementation supports a maximum label length of 639 (timesteps are unlimited).